FOR PURCHASE BY CUSTOMERS IN USA & CANADA ONLY
SMART-CHARGING | POWERFULL | AERODYNAMIC | COMPACT | ENERGY-CELL
The NEW Enertion S.P.A.C.E Cell Pro 4 Electric Skateboard battery is the thinnest & most powerful battery on the market to date.
It is designed to be mounted on a large range of longboard decks of varied shapes & sizes. It is not compatible with the Enertion Raptor Carbon Fiber Deck.
Building your own electric skateboard has never been easier with this total battery solution
This is more than just a battery, the Enertion S.P.A.C.E CELL is an all-in-one integrated solution for DIY builders.
This product has built-in Voltage Dispaly, Built-in On / Off switch, Built-in Easy Charge port, Built-in Battery Managment System, Mounted in a shock resitant ABS hard case that has room inside for DUAL VESC motor Controllers.
The pack has a massive 360Wh of power which will offer approximatley 38kms run time on a dual motor eboard.
> Pack rated to peak output of 80AMP, However incorporates a 40A Fuse for protection, this is ample for use on electric skateboards. This pack is for motors of 2400W or less (Including the 6372).
> The Charge time is 3-4 hours & the charger is light & compact so easy to carry.
> The battery is 10S4P meaning it has a total of 40 Cells, 4 Parallel groups of 10 cells in series. Samsung 25R Cells.
> Battery Chemistry LiNiCoMnP
> The Pack is 360Wh based on 36V nominal voltage. Approximately 38km range, 1.5hrs run time on Dual motor Eboard. This can vary depending on conditions & rider weight.
> Total weight is only 2.25kg
> Dimension of 568mm X 205mm X 31mm
> Mains fast charger is 100-240v compatible & outputs 42v at 2A. (battery comes with a standard 2a charger included)
Customers also viewed